Epoxy Flooring Singapore
Seamless resin flooring systems selected for use, traffic, substrate condition and maintenance needs.
Overview
A resin floor starts with a sound, properly prepared base. Epoxy flooring can create a cleanable, seamless and hard-wearing finish, but its performance relies on moisture condition, substrate strength and preparation. We review how the area is used before recommending a coating build-up, finish and work sequence.
Problems we solve
What property owners commonly notice.
- Dusting or difficult-to-clean concrete floors
- Worn coatings in work or service areas
- Oil, dirt and staining absorbed into bare concrete
- Need for a seamless floor finish
- Localised cracks, chips or uneven floor defects
Our response
The concrete substrate is assessed, repaired and mechanically or otherwise prepared as required. Primer, body coat and selected finish are then applied within the specified recoat windows. Colour, texture and slip considerations are discussed in relation to the property's use.
A scope built around the actual condition.
The appropriate method is selected only after the affected area, access constraints and probable failure mechanism have been considered.
Epoxy Coating Systems
Multi-coat resin finishes for suitable prepared concrete floors in light to moderate service environments.
Self-Levelling Epoxy
A smoother, higher-build finish for appropriate interior substrates where level appearance and cleanability matter.
Anti-Slip Finishes
Textured aggregate or finish options considered for areas where additional underfoot grip is required.
Our process
Clear stages, fewer surprises.
Floor Assessment
Review moisture risk, contamination, strength, defects and operational needs.
Preparation & Repair
Clean, prepare and make good the substrate to receive the resin system.
Layered Application
Apply primer, body and finish layers within controlled intervals.
Cure & Reopening
Protect the floor until the specified cure stage before returning it to use.
Benefits
Why the right repair approach matters.
- Seamless and easier-to-clean surface
- Finish options for different operational needs
- Improved appearance of suitable concrete floors
- Local repairs incorporated before coating
- Planned reopening around curing requirements
Property types
Planned for different sites and operating needs.
FAQs
Useful answers before you decide. Every property is different. These answers are general guidance; an inspection allows for a condition-specific recommendation.
Can epoxy be applied over any concrete floor?
The substrate must be sufficiently sound, dry and free from contamination for the selected system. Moisture pressure, weak concrete or oils can cause adhesion failure if not addressed.
Is epoxy flooring slippery?
Anti-slip additives or textured finishes can be specified for areas requiring extra grip.
How long before the floor can be used?
Curing times depend on the system, temperature and humidity; typically 24–72 hours for light foot traffic and up to 7 days for heavy use.
Can cracks be hidden under epoxy?
Minor cracks can be repaired and coated, but active movement may require flexible detailing or alternative solutions.
Related services
You may also need.
More Services
A practical next step
Need clarity on epoxy flooring? Share what you are seeing with our team.
+65 8953 8494 Request Free Site Inspection